Home/Technical resources

TECHNICAL RESOURCES

Technical resources

Material selection basics, evaluation methods and document guidance.

EUBO APPLICATION NOTES

Material selection, explored through the component.

Four notes connecting component areas, process conditions and evaluation.

Workbench application illustration of plastic spur gears and tooth contacts

Plastic gears and reduction mechanisms

Plastic gear noise: what should you check before choosing a grease?

Define the polymer and mating material, starting temperature, load, speed and grease dose. Compare noise together with actuation resistance, tooth condition and migration; a quieter mechanism alone does not establish suitability.

Read the note

Precision-workbench application illustration of a miniature camera module

Small sliding parts and lens-drive mechanisms

Film lubrication in optical mechanisms: where should you apply and evaluate it?

Separate sliding interfaces from optical surfaces that must remain free of coating. Define dose, drying conditions and treated finish. Published F18A, MF100 and MF400 records describe a semi-wet finish; review a fully dry requirement separately.

Read the note

Workbench application illustration of precision dispensing at a board connector

Electronic-part and display-module joints

Electronic bonding: which conditions come before material comparison?

Define substrates and joint gap, access for light or heat, dispensing geometry and environmental evaluation. Confirm that the assembly process can support the proposed curing method before comparing candidates.

Read the note

Process illustration of brush cleaning a circuit board held in a fixture

PCBA or precision parts to be cleaned

PCBA cleaning: how should you evaluate a fluorinated fluid?

Review the contaminant, compatibility with components and polymers, and cleaning/drying method for the exact grade. The fluorinated-fluid category alone does not establish flux removal or PCBA suitability; include residue and inspection in the evaluation.

Read the note

Technical articles

Foundations for defining conditions and planning application tests.

LUBRICATION

Six inputs to define before selecting a grease

A practical framework for comparing temperature, load, speed, materials, noise and life.

Read article

BONDING

Process conditions to define before choosing an electronic adhesive

Translate substrates, gap, curing equipment, takt time and strength into selection criteria.

Read article

EVALUATION

How to connect TDS values with application testing

Use published values with application conditions and acceptance criteria, not in isolation.

Read article

PRODUCT DOCUMENTS

Confirm documents and specifications

Choose a product and the documents you need.

Product family

Grade / product name

Requested documentsTDS · technical dataSDS · safety dataChemical-substance information enquiry

Preferred document language

Select a product family and at least one document.

Documents and sample arrangements

Document language & revision: Specify your preferred language. Available languages, revision dates and versions are confirmed for the selected grade.
Evaluation samples: Share the application, grade, quantity and destination. Availability, packaging, costs and lead time are confirmed individually.

Discuss a sample request

Optional · Prepare a Tajikistan review sheet (print / PDF)

Optional: create a one-page Tajikistan sheet to share with engineering or procurement. It contains the selected product and your own conditions; it is not a product certificate.

Your application and parts

Actual process and operating conditions

Evaluation and open questions

Select a product family above to preview the review sheet.

Sheet entries are used for printing. The document request form receives the product and document choices.

Frequently asked questions

Can I enquire without a grade?

Share what is known about the application, component, materials, temperature, motion and process. These define the conditions for candidate screening.

Can TDS values determine adoption?

Review documented test conditions against actual use, then evaluate the required performance on actual parts and equipment.

How do I confirm document scope?

Specify the grade, use, region and required standard. Confirm scope against current grade-specific records and the responsible contact.